Home /Archive /2014, Volume 10 /10(5) /Evaluation of Suitability of Power Engineering Equipment Elements for Their Use over Fleet Life

Evaluation of Suitability of Power Engineering Equipment Elements for Their Use over Fleet Life

TitleEvaluation of Suitability of Power Engineering Equipment Elements for Their Use over Fleet Life
Publication TypeJournal Article
Year of Publication2014
AuthorsDrobenko, BD, Budz, SF, Astashkin, VI
Short TitleSci. innov.
DOI10.15407/scine10.05.005
Volume10
Issue5
SectionResearch and Technical Innovative Projects of the National Academy of Sciences of Ukraine
Pagination5-16
LanguageEnglish
Abstract

An approach to the determination of stress-strain state of boiler’s operating elements has been proposed. The possibility of their further exploitation has been discussed. The state of the boiler drums at Unit 6 of the Dobrotvir power plant and at Unit 5 of the Burshtyn power plant of DTEK ZakhidEnergo, PJSC, with exhausted fleet life has been studied. Recommendations on the improvement of techniques for their repair have been developed; a conclusion on the possible extension of their operational lifetime has been made.
Keywordsmathematical and numerical simulation, operational lifetime, strength
References

1. Decisions of Scientific Conference «Diagnostics and Extension of Service Life of Power Engineering Equipment Elements at Trypillia TPP of 27.02.2013. Ministry of Energy and Coal Industry of Ukraine (in Ukrainian).
2. Akimov, A: Chornobyl NPP, Vuhlehirsk TPP…Who is the Next? Dzerkalo Tyzhnia, 15 (2013) (in Ukrainian).
3. Guidelines COY 40.1-21677681-02:2009. (2009). Procedure for Extending Service Life of High-Pressure Boiler Drums. Kyiv: «Industrial Investment Fund for Energy Sector Development», Power Engineering Companies Association (in Ukrainian).
4. Simulation and Optimization in Thermomechnics of Conductive Inhomogeneous Bodies. In Burak, Ya.Y. and Kushnir, R.M. (Eds.). Volume 4: Hachkevych, O.R. and Drobenko, B.D.: Thermomechnics of Magnetized Conductive Thermal Sensitive Bodies. Lviv: SPOLOM, 2010 (in Ukrainian).
5. Allen, D.H. and Heisler, W.E.: A Theory for Analysis of Thermoplastic Materials. Computers & Structures, 13, 129—135 (1981).
https://doi.org/10.1016/0045-7949(81)90117-6
6. Zienkiewicz, O.C., Wood, W.L., and Nine N.W.: A Unified Set of Single Step Algorithm. Part 1: General Formulation and Applications. Int. J. for Num. Meth. in Eng., 20, 1529—1552 (1984).
https://doi.org/10.1002/nme.1620200814
7. Key Guidelines for Inspection and Techniques of Repairing High-Pressure Boiler Drums Made of 16GNM, 16 GNMA and 22K Steel. (1978). Moscow: Publishing House of the Ministry of Electrification of USSR and the Ministry of Power Engineering (in Russian).
8. Stationary Boilers and Pipelines for Steam and Hot Water. Standards for Strength Calculation. OST 108.031.08-85 — OST 108.031.10-85. (1987). Moscow: Publi shing House of the Ministry of Power Engineering (in Russian).
9. Nemchenko, V.I., Vasylyk, A.V., Zadorozhnyi, M.V. et al.: Stress Optimization of Geometric Parameters of Defect Samples for High-Pressure Boiler Drums. Power Engineering and Electrification, 6, 22—28 (2011) (in Ukrainian).
10. Nemchenko, V.I., Vasylyk, A.V., Zadorozhnyi, M.V. et al.: Refined Computation of Stressed State of Fitting Tubes with Local Defect Samples. Power Engineering and Electrification, 10, 17—22 (2010) (in Ukrainian).